Are you eager to enjoy the delights of your Taylor 441 Shake Freezer but feeling a bit overwhelmed by the assembly process? Fret not! Our step-by-step guide ensures a hassle-free experience, allowing you to whip up frozen treats with ease. Follow these straightforward instructions, and you’ll be enjoying your delicious creations in no time.
Preparation: Before diving into the assembly process, ensure that your Taylor 441 Shake Freezer Machine is impeccably cleaned, with all parts ready for action. Take a moment to lay out the following equipment for easy access during assembly:
Drive Shaft
Drive Seal
Beater Assembly
Scraper Blades
Draw Valve
Door
Door Bearing
Nuts
Rings
Step-by-Step Assembly Guide:
Pre-Cleaning Preparation: Thoroughly clean your machine to ensure a hygienic starting point.
Drive Shaft and Seal: Place the seal over the drive shaft and apply lubricant to both for a seamless fit.
Drive Shaft Insertion: Carefully insert the drive shaft into the freezing cylinder until you hear a satisfying pop.
Beater Assembly Attachment: Attach two scraper blades to the beater assembly and connect it to the back of the drive shaft, ensuring a flush fit with the door.
Draw Valve Integration: Check and replace smaller o-rings on the draw valve if necessary, lubricating both. Insert the valve into the door, aligning it as per the “this side up” direction.
Door and Bearing Placement: Position the bearing over the door, along with the corresponding large o-ring.
Securing the Door: Place the door into the machine, ensuring it sits flush. Secure it by inserting and tightening the nuts to prevent any product leakage.
Adjustment of Draw Valve: Adjust the draw valve at the top of the handle to ensure smooth product dispensing.
Final Touch: Congratulations! Your Taylor 441 Shake Freezer Machine is now ready to create delightful frozen desserts.
Additional Support and Services: At Rocky Mountains Distributing, we are dedicated to ensuring your experience with your commercial restaurant equipment is nothing short of exceptional. As your Taylor distributor in Colorado, Wyoming, and New Mexico, we offer additional support and services to make your experience even more seamless:
For parts inquiries, contact our parts department to have them shipped directly to you.
Join our convenient auto-ship program for quarterly deliveries of essential machine parts.
If your machine requires maintenance, call our service line at 800-758-1038 to make a service request.
Troubleshooting enthusiasts can reach our tech support hotline for assistance over the phone.
Feel free to reach out with any questions, concerns, or need any assistance. Your culinary delights await – assemble and enjoy!
header.all-comments